6″ ID Black Heat Shrink Tube 2:1 ratio wrap (4 feet) polyolefin 6.0″ inch 150mm
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 60 Days |
| Country/Region Of Manufacture | China |
| Material | Polyolefin |
| Nominal Inside Diameter (ID) | 6.0" (150mm) |
| Actual Length (Feet) | 4 feet |
| Actual Inside Diameter (ID) | 153mm +/- 2.0 |
| Structural Build | Flexible |
| Type | Heat Shrink Tubing |
| Minimum Operating Temperature (Actual) | -55°C |
| Standards/Compliance | RoHS |
| Maximum Operating Temperature (Actual) | 125°C |
| Length Type | Cut by the foot |
| Heat Shrink Ratio | 2:1 |
| Sheath Color | Black |
| MPN | Does Not Apply |
| Brand | Yongli |
You will receive 4 feet of BLACK 6.0" (150mm) I.D. (inner diameter) tubing per quantity ordered The 150mm ID tube is approximately 9.3" inches wide while flattened before use. Diameter is not the same thing as width!If you need a tube that is about 6.0" wide while flattened, you instead want the 100mm ID tube. You can find that here: https://www.ebay.com/itm/203049616047Smaller sized tubes can be found here: https://www.ebay.com/itm/203049859100Tubes with adhesive inner wall (dual-wall tubing) can be found here: https://www.ebay.com/itm/203049856945If you need a longer uncut continuous length of tubing, it is usually available upon special request - add a note or message to request! Add multiple of my items to your cart to unlock higher discounts!Premium polyolefin heat shrinkable tubing2 to 1 shrinkage ratio; will shrink to half of the stated inner diameterAll stated diameters are internal diameter pre-shrunk measurementsSmall printing on the tubing states the diameter and temperature range (some colors/sizes may have no printing) UNDERSTANDING THE SIZING CHART: Nominal Internal Diameter - this is the starting size, referred to in the title of each postActual Internal Diameter - the tubing is actually slightly larger than the nominal size to ensure a proper fit!Approximate Flat Width - larger sizes start out folded down flat, this is a flat dimension for your referenceShrunk Internal Diameter - the tubing will shrink down to smaller than this size, guaranteed!