4″ ID White Heat Shrink Tube 2:1 ratio (1 foot/12 inches) polyolefin 4.0″ 100mm
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 60 Days |
| Country/Region Of Manufacture | China |
| Material | Polyolefin |
| Nominal Inside Diameter (ID) | 4.0" (100mm) |
| Minimum Operating Temperature (Actual) | -55°C |
| Standards/Compliance | RoHS |
| Maximum Operating Temperature (Actual) | 125°C |
| Type | Heat Shrink Tubing |
| Actual Length (Feet) | 1 foot |
| Actual Inside Diameter (ID) | 102mm +/- 1.5 |
| Structural Build | Flexible |
| Heat Shrink Ratio | 2:1 |
| Sheath Color | White |
| MPN | Does Not Apply |
| Brand | Salipt |
You will receive 12 inches of WHITE 4.0"(100mm) I.D. (inner diameter) tubing, per quantity ordered The 100mm ID tube is approximately 6.2" wide while flattened before use. Diameter and width are not the same thing!If you need a tube that is about 4" wide while flattened, you instead want the 60mm ID tube. You can find that here: https://www.ebay.com/itm/203049616047Smaller sized tubes can be found here: https://www.ebay.com/itm/203049859100Tubes with adhesive inner wall (dual-wall tubing) can be found here: https://www.ebay.com/itm/203049856945 If you need a longer uncut continuous length of tubing, it is usually available upon special request - add a note or message to request! Add multiple of my items to your cart to unlock higher discounts!Premium polyolefin heat shrinkable tubing2 to 1 shrinkage ratio; will shrink to half of the stated inner diameterAll stated diameters are internal diameter pre-shrunk measurementsSmall printing on the tubing states the diameter and temperature range (some colors/sizes may have no printing) UNDERSTANDING THE SIZING CHART: Nominal Internal Diameter - this is the starting size, referred to in the title of each postActual Internal Diameter - the tubing is actually slightly larger than the nominal size to ensure a proper fit!Approximate Flat Width - larger sizes start out folded down flat, this is a flat dimension for your referenceShrunk Internal Diameter - the tubing will shrink down to smaller than this size, guaranteed!